-
Telekomünikasyon
-
Fiber Optik Kablolar
- < div class="menu-icon"> div > Konvansiyonel Kablolar
- < div class="menu-icon"> div > OPGW
- < div class="menu-icon"> div > ADSS
- < div class="menu-icon"> div > Denizaltı Kablolar
- < div class="menu-icon"> div > WTC (Dünyada en Yüksek Fiber Kapasiteli Kablo)
-
Optik Fiberler
- < div class="menu-icon"> div > Multi Mode
- < div class="menu-icon"> div > Single Mode
- < div class="menu-icon"> div > Özel Uygulamalar için Fiberler
-
Fiber Ek Cihazı ve İlgili Ürünler
- < div class="menu-icon"> div > Telekomünikasyon Uygulamaları
- < div class="menu-icon"> div > Özel Uygulamalar
-
Optik Test Cihazları
- < div class="menu-icon"> div > Optik Spektrum Analizörler
- < div class="menu-icon"> div > OTDR
- < div class="menu-icon"> div > Optik Dalgaboyu Ölçüm Cihazı
- < div class="menu-icon"> div > Modüler Üretim Test Sistemi
- < div class="menu-icon"> div > Taşınabilir Optik Güçölçerler & Işık Kaynakları
- < div class="menu-icon"> div > Taşınabilir Ethernet Test Cihazları
-
RF Ürünleri ve Telekom Kuleleri
- < div class="menu-icon"> div > Konnektörler & Adaptörler
- < div class="menu-icon"> div > Kablolar
- < div class="menu-icon"> div > Test Cihazları
- < div class="menu-icon"> div > Antenler
- < div class="menu-icon"> div > Saha Çözümleri
- < div class="menu-icon"> div > Aletler ve Aksesuarlar
- < div class="menu-icon"> div > Telekom Kuleleri
-
Bakır Telekomünikasyon Kabloları
- < div class="menu-icon"> div > Bakır Telekomünikasyon Kabloları
-
F/O Kablolar için Montaj Aksesuarları
- < div class="menu-icon"> div > F/O Kablolar için Montaj Aksesuarları
-
El Aletleri
- < div class="menu-icon"> div > Koaksiyel Kablolar için
- < div class="menu-icon"> div > Fiber Optik Kablolar için
- < div class="menu-icon"> div > Elektrik Kabloları için
- < div class="menu-icon"> div > Güç Kabloları için
-
Fiber Muayene ve Temizlik Ürünleri
- < div class="menu-icon"> div > Fiber Muayene
- < div class="menu-icon"> div > Temizlik Kitleri
- < div class="menu-icon"> div > Basmalı Tip Temizleme Ürünleri
- < div class="menu-icon"> div > Makaralı Tip Temizleme Ürünleri
- < div class="menu-icon"> div > Fiber Optik Temizleme Sıvıları
- < div class="menu-icon"> div > Temizleme Mendilleri ve Temizleme Kartuşları
- < div class="menu-icon"> div > Temizleme Çubukları & Uçları
-
Optik Aksesuarlar
- < div class="menu-icon"> div > Merkez Ofis Uygulamaları
- < div class="menu-icon"> div > Optik Kabinler
- < div class="menu-icon"> div > Çok Katlı Bina Çözümleri
- < div class="menu-icon"> div > Kutular ve Optik Prizler
- < div class="menu-icon"> div > Optik Bölücüler
- < div class="menu-icon"> div > Optik Ek Kutuları
-
-
-
- Medikalde Fiber
- Güneş Pili
RF Ürünleri ve Telekom Kuleleri
VIA®
Ürün Kodu JMMZMT
Rosenberger’s series VIA® (Variable Interface Adaptor) is designed for board-to-board and board-to-module RF interconnections up to 6 GHz. The innovative mechanical design features both limited detent and smooth bore interfaces integrated into the adaptor – one side of the bullet is responsible for limited detent, the other side for smooth bore. The unique catch mechanism inside the adaptor ensures secure, reliable connection. The Rosenberger VIA® covers all requirements for multiple connections and complex mobile communication solutions in remote radio heads (RRHs) as well as in various other applications.
Features
- Impedance 50 Ω
- Interface according to Rosenberger VIA®
- Frequency range DC up to 6 GHz
- Return loss ≥ 32 dB (typ.)
- Power 100 W @ 2.2 GHz @ 25 °C
- Minimum board-to-board distance 12 mm
- Axial misalignment ± 1 mm
- Radial misalignment 4°
- Mating cycles ≥ 100
- Snap-on locking mechanism
BENZER ÜRÜNLER
PreCONNECT® COPPER from Rosenberger OSI are factory assembled copper data cable trunks and Multijumper for Plug & Play installations and find their applications in infrastructure and IT room cabling in data centres.
Ürün Başarıyla Sepete Eklendi
Rosenberger presents a new and innovative GPS over Fiber system for applications where coax cannot be used to route the GPS signal to base stations. With more centralized RAN and large-scale DAS applications, there are many cases where the GPS antennas are located too far from the base stations for coaxial losses to be acceptable. To overcome this issue, the GPS over Fiber system converts the RF signal to light, transmits it over the fiber, and then restores the light to the original RF signal. Working in contrast to the many systems that employ a bulky remote unit – which requires power and separate mounting space – as well as a large master unit encompassing an active GPS splitter, Rosenberger has rethought the process and designed a fiber-optic replacement for the coaxial cable. Instead of a master unit and a remote unit, the system uses an electrooptical converter (E/O converter) at the antenna and an opto-electrical converter (O/E converter) near the base station. By employing this method, the E/O converter becomes a small, compact unit that connects directly to the GPS antenna. The unit is so small that it can even fit within a 1 ½ inch pipe of the kind often used to mount GPS antennas. The O/E converter handles all alarms and is a compact unit. It can be used to power the E/O converter and can be connected to standard GPS splitters with full support for their redundancy functionality. This means that the GPS over Fiber system fully emulates the behavior of a passive copper cable and GPS antenna, allowing any device that is normally connected to the GPS antenna to maintain proper operation when connected to an O/E converter. Interconnecting the two units i.e. E/O converter to the O/E converter is a thin hybrid cable comprised of fiber and power, which means no power source is required at the GPS antenna. The individual link support for each GPS antenna allows for the flexibility of using a normal coaxial configuration and simply replacing each coax cable from a GPS antenna with an E/O converter, an O/E converter, and a hybrid cable. With a maximum hybrid cable length of 1.9 miles (3 km), this system can meet the demands of almost any installation
Ürün Başarıyla Sepete Eklendi
Rosenberger desktop analyzers are portable and flexible for R&D and test labs. The budget friendly broadband base unit concept offers maximum flexibility to add any other filter unit in the range of 700 to 2700 MHz to the base unit. It allows continuous flexibility in an ever changing environment.
Ürün Başarıyla Sepete Eklendi
Rosenberger provides a variety of snap-in D-Sub coaxial and power inserts for fast, reliable mixed card edge chassis. Their small dimensions allow high packing densities as well as easy connection. A combination including power connectors is also available on request. D-Sub Coax Inserts and cable connectors 50 Ω are designed for use in mixed card edge connections in accordance to D-Sub. The maximum frequency is approximately 2 GHz. Available on request. Power Inserts meet the requirements of DIN 41626-T1 and are designed for use in mixed card edge connections in accordance to DIN 41612 or D-Sub. Contact current 10 A, 20 A, 30 A, 40 A. Available on request.
Ürün Başarıyla Sepete Eklendi
- TMM Telekom Makine Madencilik San. Ve Tic.Ltd.Şti, müşterilerinin çeşitli ihtiyaçları için uluslararası pazara hizmet veren uluslararası bir şirkettir.
- İletişim
- İletişim Formu
- Mail Gönder
- Bizi Takip Edin
- Bizi Arayın