Single Fiber Cleaver CT08

The CT52 is designed for cleaving silica fiber with 125μm cladding diameter, specially for its short length cleaving capability. Minimum 3mm cleave is possible by up to 900μm fiber coating, while the coating to be clamped.

The Fiber holder FH-40-LT900 is exclusively designed for holding loose tube buffered fiber by Fujikura's fusion splicer,FSM-100 series, FSM-45 series, FSM-40F and FSM-40PM. The FH-40-LT900 holds the loose tube bufferd fiber by tightening a screw in the lid. The FH-40-LT900 is supplied with a pair.

The CleaveMeterTM interferometer system is designed for inspecting the surface quality, flatness and perpendicularity of cleaved and polished optical fibers. Complementing the NYFORS AutoCleaverTM line of automatic fiber cleavers with process documentation and optimization functionality, it allows every cleave to be individually inspected and evaluated even in high volume production environments.

Nyfors product. The AutoCleaver S1™ senses the edge of the coating to automatically adjust the bare fiber length after cleaving. This feature is valuable when a specific and accurate bare fiber length is required. The requested bare fiber length is specified by the customer at order and can be fine tuned by software between 0 and 500 μm.