Large Diameter Optical Fiber Cleaver CT-105

The 41R is a equipped with good mobility and our wireless communication function, “Active Blade Management Technology”, where the splicer is connected to and monitors the fiber cleaver and ribbon fiber stripper With Active Blade Management Technology, it is far easier to maintain high quality fiber preparation. This product monitors every fiber’s end shape to assess the cleave quality. If the cleaved fiber is bad due to a worn blade position, this product sends a command to the fiber cleaver to rotate to the next viable blade position. The cleaver then executes the blade rotation automatically via an internal motor. This functionality greatly prevents operators from making a bad splice due to a worn out blade position. In addition, both the heating temperature and heating time of the ribbon fiber stripper are automatically changed according to the splice mode setting.

AC adapter for Fujiukra Fusion Splicer.

Whether splicing similar fiber types or double clad LDF fibers for high power lasers, the FSM-100P+ splicers provide multiple solutions for diverse production needs. The FSM-100　+　series sets the standard for fusion splicing with a multitude of new features designed to make splicing easier.

Nyfors product. The AutoCleaver S1™ senses the edge of the coating to automatically adjust the bare fiber length after cleaving. This feature is valuable when a specific and accurate bare fiber length is required. The requested bare fiber length is specified by the customer at order and can be fine tuned by software between 0 and 500 μm.