ARAMA SONUÇLARI
45-115 kV Adjustable Jacket, Insulation & Semi-Con End Stripper
Ürün Başarıyla Sepete Eklendi
5-46 kV Adjustable Jacket & Insulation Stripper
Ürün Başarıyla Sepete Eklendi
Ürün Başarıyla Sepete Eklendi
Ürün Başarıyla Sepete Eklendi
Ürün Başarıyla Sepete Eklendi
Non-Adjustable Cable Stripper For Tree Wire & Spacer Cable Mid-Spans
Ürün Başarıyla Sepete Eklendi
Whether splicing similar fiber types or double clad LDF fibers for high power lasers, the FSM-100M+ splicers provide multiple solutions for diverse production needs. The FSM-100M+ sets the standard for fusion splicing with a multitude of new features designed to make splicing easier.
Ürün Başarıyla Sepete Eklendi
The CT52 is designed for cleaving silica fiber with 125μm cladding diameter, specially for its short length cleaving capability. Minimum 3mm cleave is possible by up to 900μm fiber coating, while the coating to be clamped.
Ürün Başarıyla Sepete Eklendi
AFL’s PowerCleave combines the precision of an ultrasonic cleaver with the ease and improved fiber management of the Fujikura fiber holder system. The PowerCleave™ utilizes the tensile stress method to avoid touching or damaging the bare glass surface during cleaving, ensuring highly robust, reliable and durable splice results. The PowerCleave provides consistent flat ends even at cleave lengths as short as 3 mm. Specially designed for use with Fujikura’s specialty market splicers, this advanced cleaving system allows for more reliability and greater splicing consistency with less dependence on operator technique.
Ürün Başarıyla Sepete Eklendi
Nyfors product. The Auto Cleaver is designed for cleaving silica fiber with 80 to 230μm cladding diameter.
Ürün Başarıyla Sepete Eklendi
The FP-04T/05 provide these same performance levels for 8/12 fiber ribbon respectively. . The FPS04 and FPS08 series are specially designed for optical components, where small packaging is a priority. These micro sleeves provide the known reliability of Fujikura sleeves in the smallest possible lengths. This easy and cost effective method is a great alternative to recoating. The FPS01 and FPS04 series offer a wide range of options to accommodate various coating sizes, and are manufactured in a variety of lengths. This gives great flexibility in designing optical modules.
Ürün Başarıyla Sepete Eklendi
FSR-05 is a model which has recoating only without a proof tester. This model is appropriate for manufactures that don’t require constant proof testing after each recoat.
Ürün Başarıyla Sepete Eklendi
FSR-06 is a model which has a recoater and proof tester with a linear clamping system. This model is appropriate for devices which conformation of reliability is required.
Ürün Başarıyla Sepete Eklendi
The FSR-07 has a recoater and mandrel proof testing.This model is appropriate not only for recoating but also reliability proof testing as well as tension testing to failure.
Ürün Başarıyla Sepete Eklendi
The ReCoater 2 is used to restore the protective coating on acrylate coated optical fibers in high strength applications. Molds are available in different sizes to cover a range of coating diameters and can easily be exchanged by the operator with no realignment required. Custom molds are available upon request.