Loading...

The 90S+ is a core alignment fusion splicer, setting a new standard in the market for fusion splicing. The 90S+ is packed with a whole host of new and enhanced features, specifically developed to enable faster splice cycle times with higher precision.

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi

The 90R4 is a mass fusion splicer capable of splicing up to 4 fiber ribbon cables simultaneously. In previous mass fusion splicer models, the v-grooves could become dirty over time due to debris and glass deposits from splicing accumulating in the v-grooves. Which in turn, could lead to fibre offsets and high losses if they were not regularly cleaned which added to the overall process time. The 90R4 comes with a first of its kind, innovative user replaceable V-groove assembly which makes this issue a thing of the past and is supplied as standard equipment with the 90R4 kit. This new V-groove assembly can be quickly and easily fitted in the field, minimizing downtime and maximising productivity. also making use of Active Blade Management Technology, which now can connect to two CT50 cleavers simultaneously.

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi

The 90R16 is a mass fusion splicer capable of splicing up to 16 fiber ribbon cables simultaneously. In previous mass fusion splicer models, the v-grooves could become dirty over time due to debris and glass deposits from splicing accumulating in the v-grooves. Which in turn, could lead to fibre offsets and high losses if they were not regularly cleaned which added to the overall process time. The 90R16 comes with a first of its kind, innovative user replaceable V-groove assembly which makes this issue a thing of the past and is supplied as standard equipment with the 90R16 kit. This new V-groove assembly can be quickly and easily fitted in the field, minimizing downtime and maximising productivity. In addition, the new V-groove design enables splicing of both conventional type 12-fiber encapsulated ribbon and SWR (Spider Web Ribbon) whilst also accommodating 250um and 200um pitch fibers. The 90R16 can also splice single fibers if required. also making use of Active Blade Management Technology, which now can connect to two CT50 cleavers simultaneously. Features

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi

The Fujikura 41S is Active V-groove splicer. By using Bluetooth technology, the 41S wirelessly connects to the CT50 fibre cleaver and enables a range of pioneering features that will improve the overall installation time, cost and efficiency for operators. The 41S also has the unique capability to estimate splice loss with greater accuracy, using a New Core Loss Estimation Function.

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi

The CT50 offers enhanced drop impact resistance compared to other existing cleavers and allows workers to replace the cleaving blade, providing customers with a drastic reduction in handling time and maintenance costs. The CT50 changes the position of the cleaving blade automatically and in accordance with the condition of the cleaving state of optical fibers on a fusion splicer through wireless communication. In addition,the CT50 can complete cleaving works including scrap collection, with a single-step.

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi

The 90R12 is a mass fusion splicer capable of splicing up to 12 fiber ribbon cables simultaneously. In previous mass fusion splicer models, the v-grooves could become dirty over time due to debris and glass deposits from splicing accumulating in the v-grooves. Which in turn, could lead to fibre offsets and high losses if they were not regularly cleaned which added to the overall process time. The 90R12 comes with a first of its kind, innovative user replaceable V-groove assembly which makes this issue a thing of the past and is supplied as standard equipment with the 90R12 kit. This new V-groove assembly can be quickly and easily fitted in the field, minimizing downtime and maximising productivity. In addition, the new V-groove design enables splicing of both conventional type 12-fiber encapsulated ribbon and SWR (Spider Web Ribbon) whilst also accommodating 250um and 200um pitch fibers. The 90R12 can also splice single fibers if required. also making use of Active Blade Management Technology, which now can connect to two CT50 cleavers simultaneously.

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi

The 41S+ is now equipped with "ACTIVE FUSION CONTROL TECHNOLOGY" and "ACTIVE BLADE MANAGEMENT TECHNOLOGY" to maintain consistent low loss splicing results. These two technologies, allow customers to achieve more stable low-loss splicing, reducing the need for rework and re-splicing.

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi

The 41R is a equipped with good mobility and our wireless communication function, “Active Blade Management Technology”, where the splicer is connected to and monitors the fiber cleaver and ribbon fiber stripper With Active Blade Management Technology, it is far easier to maintain high quality fiber preparation. This product monitors every fiber’s end shape to assess the cleave quality. If the cleaved fiber is bad due to a worn blade position, this product sends a command to the fiber cleaver to rotate to the next viable blade position. The cleaver then executes the blade rotation automatically via an internal motor. This functionality greatly prevents operators from making a bad splice due to a worn out blade position. In addition, both the heating temperature and heating time of the ribbon fiber stripper are automatically changed according to the splice mode setting.

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi

Suitable for FTTH Dedicated for single fiber cleaving. CT08 is the most robust cleaver. It is designed to provide easy replacement of fiber clamps and cleaving blade by customer thereby reducing maintenance cost and time.

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi

DC power cord for Fujikura Fusion Splicer.

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi

SS01 have one hole for stripping 250 um cable down to glass fiber.

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi

The RS02 is designed and developed with emphasis on operability and usability where less force is required for the stripping process. Furthermore wireless link with smartphones for operational parameters adjustment. These fiber stripping tools are also compatible with stripping Fujikura latest Spider Web RibbonTM ,which consists of optical fibers (with a coating diameter of 250μm or 200 μm) fixed intermittently.

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi

The RS03 is designed and developed with emphasis on operability and usability where less force is required for the stripping process. Furthermore,equipped with new features such as large capacity battery for 600 stripping cycles, 6 times larger than conventional stripper, and wireless link with smartphones for operational parameters adjustment. These fiber stripping tools are also compatible with stripping Fujikura latest Spider Web RibbonTM ,which consists of optical fibers (with a coating diameter of 250μm or 200 μm) fixed intermittently.

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi

LTC-01 is the special tool for removing loose tube without damage to the UV acrylate coated optical fiber inside the loose tube.

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi

The FP-03 series is the industry standard for durable and lasting protection of single fiber splices in field installations. The FPS01 series are specially designed for optical components, where small packaging is a priority. These micro sleeves provide the known reliability of Fujikura sleeves in the smallest possible lengths. This easy and cost effective method is a great alternative to recoating. The FPS01 and FPS04 series offer a wide range of options to accommodate various coating sizes, and are manufactured in a variety of lengths. This gives great flexibility in designing optical modules.

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi

The FP-04T/05 provide these same performance levels for 8/12 fiber ribbon respectively. . The FPS04 and FPS08 series are specially designed for optical components, where small packaging is a priority. These micro sleeves provide the known reliability of Fujikura sleeves in the smallest possible lengths. This easy and cost effective method is a great alternative to recoating. The FPS01 and FPS04 series offer a wide range of options to accommodate various coating sizes, and are manufactured in a variety of lengths. This gives great flexibility in designing optical modules.

0,00

taxIncluded

Ürün Başarıyla Sepete Eklendi