Ribbon Fiber Stripper RS03

The 41R is a equipped with good mobility and our wireless communication function, “Active Blade Management Technology”, where the splicer is connected to and monitors the fiber cleaver and ribbon fiber stripper With Active Blade Management Technology, it is far easier to maintain high quality fiber preparation. This product monitors every fiber’s end shape to assess the cleave quality. If the cleaved fiber is bad due to a worn blade position, this product sends a command to the fiber cleaver to rotate to the next viable blade position. The cleaver then executes the blade rotation automatically via an internal motor. This functionality greatly prevents operators from making a bad splice due to a worn out blade position. In addition, both the heating temperature and heating time of the ribbon fiber stripper are automatically changed according to the splice mode setting.

The FAT-04 is designed to arrange 250μm coated fibers and to make a temporary ribbon configutation so that the fibers may be mass fusion spliced using the same procedures as conventional ribbon fiber.

The FSM-100M offer a host of innovative technologies to address the rapidly expanding splicing needs of factory, manufacturing, laboratory and R&D applications. These capabilities of these model's will revolutionize the way users will splice various types of specialty fibers: LDF, low contrast PM, PCF structured, etc.

RS03 - 80 is a tool for removing the optical fiber coating for clad diameter 80 μm. By heating and softening the coating, the coating can be easily removed. By using an optional spacer, a short lead (3 mm to 5 mm) is also possible. Fiber holder is compatible with FH - 100 series and FH - 40 series. Furthermore,equipped with new features such as large capacity battery for 600 stripping cycles, 6 times larger than conventional stripper, and wireless link with smartphones for operational parameters adjustment.