Advanced Optical Fiber Cleaver CT-102

The visual fault identifier FVI-01 is a miniature red-laser light source. The red light generated from FVI-01 will be identified at the break point, sharp-bend or high loss connection in coating fiber or fiber cord.

SS03 have three holes. The smallest hole is for stripping 250 um cable down to glass fiber. The second hole is for stripping 900 um buffer coating down to 250 um buffer coating. The biggest hole is for stripping 2-3mm fiber jacket down to 900 um buffer coating.

HTS-12 is designed for stripping single count of silica optical fiber by keeping the stripped fiber's glass surface free from any physical contact. In order to achieve the above condition, the HTS-12 has a precise linear slide base for stripping action. The fiber is not scuffed by the blade or any other materials when being stripped. The HTS-12 is equipped with a heater to soften the fiber coating. The HTS-12 accepts the FH-40 series and FH-100 series Fiber Holder System

The USC-03 is Ultrasonic Cleaner designed for the cleaning of optical fiber using the FH-40, 50, 60 and 100 series of Fujikura Fiber Holder. Timer switch and Cleaning Power Volume enable to edit cleaning program. By using this equipment the fiber can be cleaned after stripping without any physical contact.