Sinyal ve Kontrol Kabloları
_4f0de13d-6191-4f2b-8da7-4d4706281433.png){kind=icon}
Çinko / Zn
Kurşun / Pb
Fiber Ek Cihazı ve İlgili Ürünler
Nyfors AutoCleaver S1
Ürün Kodu OHSEZU
Nyfors product. The AutoCleaver S1™ senses the edge of the coating to automatically adjust the bare fiber length after cleaving. This feature is valuable when a specific and accurate bare fiber length is required. The requested bare fiber length is specified by the customer at order and can be fine tuned by software between 0 and 500 μm.
Features
- Fully automatic
- Low cleave angles, < 0.3 degrees
- Very flat end faces
- Operator independent
- Designed for production environment
- Automatic fiber waste collection
- Long-lasting diamond
- Available for 80 and 125 μm clad fiber
- PC controllable
Specification Sheet
The Fujikura 41S is Active V-groove splicer. By using Bluetooth technology, the 41S wirelessly connects to the CT50 fibre cleaver and enables a range of pioneering features that will improve the overall installation time, cost and efficiency for operators. The 41S also has the unique capability to estimate splice loss with greater accuracy, using a New Core Loss Estimation Function.
Ürün Başarıyla Sepete Eklendi
Ürün Başarıyla Sepete Eklendi
FSR-05 is a model which has recoating only without a proof tester. This model is appropriate for manufactures that don’t require constant proof testing after each recoat.
_927163e5-d1b4-4309-8b9b-aac7fc87445d.png)
_5df15f60-a573-4570-87b1-b68674f7700c.png)
