FOCIS WiFi2 ™ Fiber Optik Konektör İnceleme Sistemi

The One-Click Cleaner is designed to clean MPO and MTP® multi-fiber connectors used in data centers and other high density optical networks. The One-Click Cleaner MPO / One-Click Cleaner MPO-16 are revolutionary push-type cleaners which simplify cleaning of the ferrule end-face of both exposed MPO/MTP® connectors and MPO/MTP® connectors in adapters, both 12 fiber and 16 fiber (including multi-row variants). As with all One-Click Cleaners. the One-Click Cleaner MPO / MPO-16 use the innovative push-to-clean design. The mechanical push action advances the optical grade cleaning tape while effectively and gently cleaning the end-face of the connector.

NEOCLEAN-E Simple-to-Use Refillable Design The NEOCLEAN-E uses a simple one push action to quickly and effectively clean contamination from the ferrule end-face of connectors on jumpers or in adapters, reducing cleaning time. It is effective for removing oil, dust, and dirt particulates that can have a negative impact on fiber optic network performance. The replaceable cleaning cartridge can perform 750 cleanings, reducing cleaning cost. Available for SC, FC, ST, E2000, LC and MU connectors with UPC or APC polishes. NEOCLEAN-M Clean MPO/MTP® Connectors with an Easy Push Operation The NEOCLEAN-M is designed to clean MPO and MTP® multi-fiber connectors used in data centers and other high density optical networks. The NEOCLEAN-M uses a one-push operation, which simplifies cleaning of the ferrule end-face of both MPO/ MTP exposed connectors and connectors in adapters. The one-push operation advances the specially designed microfiber tape while effectively and gently cleaning the end-face of the connector. NEOCLEAN-M2 The NEOCLEAN-M2 is designed to clean MPO-16 and MTP-16 multi-fiber connectors used in data centers and other high density optical networks. The NEOCLEAN-M2 uses a one-push operation, which simplifies cleaning of the ferrule end-face of both MPO-16/ MTP-16 exposed connectors and connectors in adapters. The one-push operation advances the specially designed microfiber tape while effectively and gently cleaning the end-face of the connector.

The Sticklers™ brand CleanWipes™ are a convenient cleaning tool designed for high-speed cleaning of optical jumpers and patch cords. Its designs enables technicians to clean fiber optic end-faces at the lowest possible cost per clean. The exclusive, static-dissipative, high-modulus fabric cleaning material will not tear or shred away even when cleaning LC connectors. The highly absorbent material is very soft, will not scratch connectors and delivers superior cleaning results. The color-coded CleanSots™ tracks remind technicians to never re-use a wipe, eliminating cross-contamination. The box design also eliminates the chance of cleaning on an already used wipe and minimizes fingertip contamination. The CleanWipes™ system offers a simple, fast and disciplined cleaning process that delivers perfectly clean connectors. Better cleaning makes networks run faster and avoids expensive service calls.

CCT Connector Cleaning Tips are a unique technology in fiber connector end-face cleaning. Rather than a fabric-covered or foam-covered stick, CCTs are molded cleaning tips that trap contamination and wick cleaning solvents away from connector end-faces. These tips use a molded, sintered polymer that is both porous and pliable, conforming to virtually any fiber end-face polish geometry while trapping and absorbing contaminants. Designed to be used with AFL's FCC2 Connector Cleaning Fluid for consistent and reliable connector cleaning results. CCT Connector Cleaning Tips offered by AFL are intended for cleaning the ferrule end-faces in adapters and sockets, as well as the exposed ferrules and termini of jumpers. CCTs are available for most commercial and Military Specification ferrule sizes.