-
Telekomünikasyon
-
Fiber Optik Kablolar
- < div class="menu-icon"> div > Konvansiyonel Kablolar
- < div class="menu-icon"> div > OPGW
- < div class="menu-icon"> div > ADSS
- < div class="menu-icon"> div > Denizaltı Kablolar
- < div class="menu-icon"> div > WTC (Dünyada en Yüksek Fiber Kapasiteli Kablo)
-
Optik Fiberler
- < div class="menu-icon"> div > Multi Mode
- < div class="menu-icon"> div > Single Mode
- < div class="menu-icon"> div > Özel Uygulamalar için Fiberler
-
Fiber Ek Cihazı ve İlgili Ürünler
- < div class="menu-icon"> div > Telekomünikasyon Uygulamaları
- < div class="menu-icon"> div > Özel Uygulamalar
-
Optik Test Cihazları
- < div class="menu-icon"> div > Optik Spektrum Analizörler
- < div class="menu-icon"> div > OTDR
- < div class="menu-icon"> div > Optik Dalgaboyu Ölçüm Cihazı
- < div class="menu-icon"> div > Modüler Üretim Test Sistemi
- < div class="menu-icon"> div > Taşınabilir Optik Güçölçerler & Işık Kaynakları
- < div class="menu-icon"> div > Taşınabilir Ethernet Test Cihazları
-
RF Ürünleri ve Telekom Kuleleri
- < div class="menu-icon"> div > Konnektörler & Adaptörler
- < div class="menu-icon"> div > Kablolar
- < div class="menu-icon"> div > Test Cihazları
- < div class="menu-icon"> div > Antenler
- < div class="menu-icon"> div > Saha Çözümleri
- < div class="menu-icon"> div > Aletler ve Aksesuarlar
- < div class="menu-icon"> div > Telekom Kuleleri
-
Bakır Telekomünikasyon Kabloları
- < div class="menu-icon"> div > Bakır Telekomünikasyon Kabloları
-
F/O Kablolar için Montaj Aksesuarları
- < div class="menu-icon"> div > F/O Kablolar için Montaj Aksesuarları
-
El Aletleri
- < div class="menu-icon"> div > Koaksiyel Kablolar için
- < div class="menu-icon"> div > Fiber Optik Kablolar için
- < div class="menu-icon"> div > Elektrik Kabloları için
- < div class="menu-icon"> div > Güç Kabloları için
-
Fiber Muayene ve Temizlik Ürünleri
- < div class="menu-icon"> div > Fiber Muayene
- < div class="menu-icon"> div > Temizlik Kitleri
- < div class="menu-icon"> div > Basmalı Tip Temizleme Ürünleri
- < div class="menu-icon"> div > Makaralı Tip Temizleme Ürünleri
- < div class="menu-icon"> div > Fiber Optik Temizleme Sıvıları
- < div class="menu-icon"> div > Temizleme Mendilleri ve Temizleme Kartuşları
- < div class="menu-icon"> div > Temizleme Çubukları & Uçları
-
Optik Aksesuarlar
- < div class="menu-icon"> div > Merkez Ofis Uygulamaları
- < div class="menu-icon"> div > Optik Kabinler
- < div class="menu-icon"> div > Çok Katlı Bina Çözümleri
- < div class="menu-icon"> div > Kutular ve Optik Prizler
- < div class="menu-icon"> div > Optik Bölücüler
- < div class="menu-icon"> div > Optik Ek Kutuları
-
-
-
- Medikalde Fiber
- Güneş Pili
RF Ürünleri ve Telekom Kuleleri
Coax Jumpers
Ürün Kodu FVYMED
Rosenberger coaxial jumpers have been designed using the many years of experience gained by Rosenberger engineers in this field. The unique knowledge of designing and manufacturing world-leading PIM testing equipment is directly reflected in the jumpers. Rosenberger jumpers have the industry-best PIM levels: -117 dBm / -160 dBc @ 2 x 20 W (typ. -120 dBm / -163 dBc @ 2 x 20 W). These excellent levels are guaranteed for every assembly that leaves the Rosenberger production facility.
Features
- Traceability - Rosenberger jumpers are individually tested for return loss and PIM. Test data can be retrieved in 3 ways:
- By scanning in the data matrix code on the jumper packaging
- By scanning in the bar code on the jumper itself
- By entering the serial number on mdm.rosenberger.com
BENZER ÜRÜNLER
Rosenberger presents a new and innovative GPS over Fiber system for applications where coax cannot be used to route the GPS signal to base stations. With more centralized RAN and large-scale DAS applications, there are many cases where the GPS antennas are located too far from the base stations for coaxial losses to be acceptable. To overcome this issue, the GPS over Fiber system converts the RF signal to light, transmits it over the fiber, and then restores the light to the original RF signal. Working in contrast to the many systems that employ a bulky remote unit – which requires power and separate mounting space – as well as a large master unit encompassing an active GPS splitter, Rosenberger has rethought the process and designed a fiber-optic replacement for the coaxial cable. Instead of a master unit and a remote unit, the system uses an electrooptical converter (E/O converter) at the antenna and an opto-electrical converter (O/E converter) near the base station. By employing this method, the E/O converter becomes a small, compact unit that connects directly to the GPS antenna. The unit is so small that it can even fit within a 1 ½ inch pipe of the kind often used to mount GPS antennas. The O/E converter handles all alarms and is a compact unit. It can be used to power the E/O converter and can be connected to standard GPS splitters with full support for their redundancy functionality. This means that the GPS over Fiber system fully emulates the behavior of a passive copper cable and GPS antenna, allowing any device that is normally connected to the GPS antenna to maintain proper operation when connected to an O/E converter. Interconnecting the two units i.e. E/O converter to the O/E converter is a thin hybrid cable comprised of fiber and power, which means no power source is required at the GPS antenna. The individual link support for each GPS antenna allows for the flexibility of using a normal coaxial configuration and simply replacing each coax cable from a GPS antenna with an E/O converter, an O/E converter, and a hybrid cable. With a maximum hybrid cable length of 1.9 miles (3 km), this system can meet the demands of almost any installation
Ürün Başarıyla Sepete Eklendi
Electric Vehicles (LEV) including e-bikes, e-scooters and pedelecs as well as for UGVs and drones. Providing fast and reliable magnetic connection, these are particularly suited to data communication and power transmission of voltages up to 60 V and current loads up to 40 A. The magnetic locking and precision self-mating capability prevents any accidental or forced disconnection from damaging the connector or the LEV. Furthermore, the high tolerance pin and socket design permits a large number of mating cycles. The RoPD® connection system is ideal for many LEV connection applications – including battery changing and charging – where frequent connection and disconnection is required. The four data contacts and two power transmission pins make a hot-plug capability unnecessary as the data contacts activate the power following connection. For added flexibility the data contacts can be used as a BUS system with an additional supply voltage. Versions of the RoPD® system are also available for EnergyBus applications.
Ürün Başarıyla Sepete Eklendi
Rosenberger RPC-1.85 precision connectors – with 50 Ω impedance and 1.85 mm outer conductor diameter – are designed for test & measurement applications up to 70 GHz. Delivering outstanding reliability and repeatability performance they are intermateable with common 1.85 mm series and V connectors as well as with RPC-2.40 connectors. This comprehensive product range is suitable for semi-rigid cables and microwave components and includes cable, panel and PCB connectors, adaptors and test & measurement accessories – including RPC-1.85 calibration kits, cables assemblies, measurement equipment, attenuators, sliding loads and airlines.
Ürün Başarıyla Sepete Eklendi
Rosenberger SMB subminiature coaxial connectors suit various applications up to 4 GHz. The snap-on locking mechanism provides a fast and reliable connection for high packing density applications. These versatile connectors can be used in internal devices and cable assemblies. Please note: Rosenberger defines male – female according to the design of center contact.
Ürün Başarıyla Sepete Eklendi
- TMM Telekom Makine Madencilik San. Ve Tic.Ltd.Şti, müşterilerinin çeşitli ihtiyaçları için uluslararası pazara hizmet veren uluslararası bir şirkettir.
- İletişim
- İletişim Formu
- Mail Gönder
- Bizi Takip Edin
- Bizi Arayın