-
Telekomünikasyon
-
Fiber Optik Kablolar
- < div class="menu-icon"> div > Konvansiyonel Kablolar
- < div class="menu-icon"> div > OPGW
- < div class="menu-icon"> div > ADSS
- < div class="menu-icon"> div > Denizaltı Kablolar
- < div class="menu-icon"> div > WTC (Dünyada en Yüksek Fiber Kapasiteli Kablo)
-
Optik Fiberler
- < div class="menu-icon"> div > Multi Mode
- < div class="menu-icon"> div > Single Mode
- < div class="menu-icon"> div > Özel Uygulamalar için Fiberler
-
Fiber Ek Cihazı ve İlgili Ürünler
- < div class="menu-icon"> div > Telekomünikasyon Uygulamaları
- < div class="menu-icon"> div > Özel Uygulamalar
-
Optik Test Cihazları
- < div class="menu-icon"> div > Optik Spektrum Analizörler
- < div class="menu-icon"> div > OTDR
- < div class="menu-icon"> div > Optik Dalgaboyu Ölçüm Cihazı
- < div class="menu-icon"> div > Modüler Üretim Test Sistemi
- < div class="menu-icon"> div > Taşınabilir Optik Güçölçerler & Işık Kaynakları
- < div class="menu-icon"> div > Taşınabilir Ethernet Test Cihazları
-
RF Ürünleri ve Telekom Kuleleri
- < div class="menu-icon"> div > Konnektörler & Adaptörler
- < div class="menu-icon"> div > Kablolar
- < div class="menu-icon"> div > Test Cihazları
- < div class="menu-icon"> div > Antenler
- < div class="menu-icon"> div > Saha Çözümleri
- < div class="menu-icon"> div > Aletler ve Aksesuarlar
- < div class="menu-icon"> div > Telekom Kuleleri
-
Bakır Telekomünikasyon Kabloları
- < div class="menu-icon"> div > Bakır Telekomünikasyon Kabloları
-
F/O Kablolar için Montaj Aksesuarları
- < div class="menu-icon"> div > F/O Kablolar için Montaj Aksesuarları
-
El Aletleri
- < div class="menu-icon"> div > Koaksiyel Kablolar için
- < div class="menu-icon"> div > Fiber Optik Kablolar için
- < div class="menu-icon"> div > Elektrik Kabloları için
- < div class="menu-icon"> div > Güç Kabloları için
-
Fiber Muayene ve Temizlik Ürünleri
- < div class="menu-icon"> div > Fiber Muayene
- < div class="menu-icon"> div > Temizlik Kitleri
- < div class="menu-icon"> div > Basmalı Tip Temizleme Ürünleri
- < div class="menu-icon"> div > Makaralı Tip Temizleme Ürünleri
- < div class="menu-icon"> div > Fiber Optik Temizleme Sıvıları
- < div class="menu-icon"> div > Temizleme Mendilleri ve Temizleme Kartuşları
- < div class="menu-icon"> div > Temizleme Çubukları & Uçları
-
Optik Aksesuarlar
- < div class="menu-icon"> div > Merkez Ofis Uygulamaları
- < div class="menu-icon"> div > Optik Kabinler
- < div class="menu-icon"> div > Çok Katlı Bina Çözümleri
- < div class="menu-icon"> div > Kutular ve Optik Prizler
- < div class="menu-icon"> div > Optik Bölücüler
- < div class="menu-icon"> div > Optik Ek Kutuları
-
-
-
- Medikalde Fiber
- Güneş Pili
BENZER ÜRÜNLER
Rosenberger has many years of experience in the manufacture of high quality cable assemblies for a wide variety of industrial test & measurement applications. Our standard microwave cable assemblies for vector network analyzers (VNA), for example, are characterized by their excellent electrical and mechanical performance for frequencies up to 110 GHz. The range includes ultra-low loss cables for antennas or applications with high power requirements; miniature cables for test systems or applications demanding high flexibility; indoor and outdoor cables; specially shielded cables and extremely phase stable cables for test & measurement applications. In defined lengths armoured RFlex™ cables are also available. Customer-specific assemblies and solutions can be ordered on request.
Ürün Başarıyla Sepete Eklendi
Rosenberger presents a new and innovative GPS over Fiber system for applications where coax cannot be used to route the GPS signal to base stations. With more centralized RAN and large-scale DAS applications, there are many cases where the GPS antennas are located too far from the base stations for coaxial losses to be acceptable. To overcome this issue, the GPS over Fiber system converts the RF signal to light, transmits it over the fiber, and then restores the light to the original RF signal. Working in contrast to the many systems that employ a bulky remote unit – which requires power and separate mounting space – as well as a large master unit encompassing an active GPS splitter, Rosenberger has rethought the process and designed a fiber-optic replacement for the coaxial cable. Instead of a master unit and a remote unit, the system uses an electrooptical converter (E/O converter) at the antenna and an opto-electrical converter (O/E converter) near the base station. By employing this method, the E/O converter becomes a small, compact unit that connects directly to the GPS antenna. The unit is so small that it can even fit within a 1 ½ inch pipe of the kind often used to mount GPS antennas. The O/E converter handles all alarms and is a compact unit. It can be used to power the E/O converter and can be connected to standard GPS splitters with full support for their redundancy functionality. This means that the GPS over Fiber system fully emulates the behavior of a passive copper cable and GPS antenna, allowing any device that is normally connected to the GPS antenna to maintain proper operation when connected to an O/E converter. Interconnecting the two units i.e. E/O converter to the O/E converter is a thin hybrid cable comprised of fiber and power, which means no power source is required at the GPS antenna. The individual link support for each GPS antenna allows for the flexibility of using a normal coaxial configuration and simply replacing each coax cable from a GPS antenna with an E/O converter, an O/E converter, and a hybrid cable. With a maximum hybrid cable length of 1.9 miles (3 km), this system can meet the demands of almost any installation
Ürün Başarıyla Sepete Eklendi
Rosenberger SMP Infinity is the innovative and highly compact PCB connector series with a one-step locking mechanism for delivering maximum performance for a wide range of applications up to 40 GHz. The series is available as cable, PCB and bulkhead connectors, as well as test adaptors and cable assemblies.
Ürün Başarıyla Sepete Eklendi
The Rosenberger HVR®300 connector system not only provides a maximum current carrying capacity of 320 A, it takes up minimal space. It features a 2-pole angled coupler for shielded cables and a cable cross section of 70 mm² along with the corresponding header. A cross section of 50 mm² is available on request. The lever locking mechanism is secured with an additional slider (CPA – Connector Position Assurance) to prevent accidental unmating.
Ürün Başarıyla Sepete Eklendi
- TMM Telekom Makine Madencilik San. Ve Tic.Ltd.Şti, müşterilerinin çeşitli ihtiyaçları için uluslararası pazara hizmet veren uluslararası bir şirkettir.
- İletişim
- İletişim Formu
- Mail Gönder
- Bizi Takip Edin
- Bizi Arayın